|
KIT MEASURMENTS
The plastic model has be measured and those measurements documented online detailed in the images below. Additional plans will be drawn to assist with the construction. Vernier calipers and micrometers were used to obtain a tolerance of -+0.02mm at 1/12 scale which converts to -+0.24mm at full scale.
Note: Some images are very large(+120k) to provide detail
|
)
)
)
)
)
)
)
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}